Signal Processing

This is a web page. Every link can be clicked. Live page on the website: https://www.wwave.com.au/signal-processing/

Wwave is an audio visual, lighting and event hire and sales company in Kensington, Melbourne. Established 2002. Phone +61 3 9372 5244.

• Back to the start (web page)
• Back to the start (text)
• This page as plain text

About this page

Enhance audio quality with signal processing solutions for live and installation setups, supported by dependable Australia wide delivery and service.

Items

• AVE Vox-DI1 Passive DI Box - SKU VOX-DI1 - $29.00
  AVE Vox-DI1 The AVE VOX-DI1 is a compact single channel passive DI box built into a sturdy metal housing (aluminium/steel) with protective corners. Easy to use with no power required. The DI provides the perfect impedance balance for connecting your instruments into mixers, and other audio equipment. The DI1 features a 3 stage switchable pad with 0dB /-20dB / -40dB for improved flexibility on stage and in the studio, and ground lift. A must have for any musician or audio professional wanting a reliable and robust DI for their shows, tours, or recordings.
• AVE Vox-Hum Hum Eliminator - SKU VOX-HUM - $59.00
  AVE Vox-Hum The AVE VOX-HUM is a compact hum eliminator that removes 60/50Hz AC hum caused by ground loops from your audio chain. Ground loops occur when there are multiple ground points which can pick up stray current causing hum, noise, and interference. The VOX-HUM removes the hum from your audio chain with a 1:1 transformer coupling, which makes it impossible for your signal cable to pick up the AC hum and noise. The other benefit and use for the VOX-HUM is its ability to convert unbalanced signal to balanced, essential for professional audio. Easy to use with 2-channel design for Stereo connections, both with ¼” (6.3mm) Jack and 3-pin XLR connectors.
• Palmer Audio PAN01 Passive DI Box - SKU PAN01 - $99.00
  The Palmer Audio PAN01 is a standard Passive DI box for interfacing from your Guitar to your PA system and mixer. Featuring German design and engineering, a high-impedance input, and both a 'link output' (for your guitar cab) and balanced output (for you PA system). The PAN01 also features a switchable odB / -30dB pad to support a range of input types and a ground lift to eliminate troublesome ground loops that can add unwanted hum and buzz into your sound. A must have for any musicians or audio professional wanting the best sound for their mix.
• Palmer LI 03 Line Isolation Box 2 Channel - SKU PLI03 - $269.00
  Palmer PLI03 Line Isolation Box 2 Channel The Palmer PLI03 gives you a two-channel isolation transformer (line isolator box). Boasting cinch (RCA) inputs and outputs, it’s perfect for connecting to notebooks, soundcards, and HIFI systems. The PLI03 also eliminates ground loops and interference signals caused by computers.
• Palmer PAN 02 PRO Professional DI Box Active - SKU PAN02PRO - $499.00
  The Palmer PAN 02 PRO gives you an active DI-box with a number of additional functions. Including an unbalanced XLR input; as well as a 3-way attenuator -10, -20, -30 dB with 12dB switchable gain and maximum output voltage of +20 dBu.
• Palmer PAN 05 Microphone Merger - SKU PAN05 - $99.00
  Palmer PAN 05 Microphone Merger The Palmer PAN 05 gives you a microphone merger that allows you to patch two microphones into one single mixing desk. So it’s the perfect solution for when you run out of channels. Given that decoupling occurs via a balanced resistor network, the PAN 05 also allows phantom power to “pass-through”. So you’re able to use your condenser microphones. However, due to the difference in sound and signal; you should avoid mixing both dynamic and condenser mics. As you will achieve the best results by using two identical mics.
• Palmer PLI06 Line Level Converter 2 In 1 Out - SKU PLI06 - $199.00
  The Palmer PLI06 brings you a Line Level Converter that acts as a dedicated interface to feed unbalanced stereo signals into balanced mono inputs.
• Palmer PLS02 Dual Channel Line Splitter - SKU PLS02 - $399.00
  Palmer PLS02 Palmer line splitters are used when a signal source must be sent to multiple inputs. For example, when one mixer output is supposed to supply signals to multiple power amplifiers in different rooms. Thanks to the use of generously dimensioned audio frequency transformers, the sound is not influenced, but ground loop hum is prevented. The PLS02 can also be used to convert unbalanced signals into balanced signals and vice versa.
• Power Dynamics PDC-150 Karaoke CD DVD USB Player - SKU PDC-150 - $249.00
  The Power Dynamics PDC-150 is a professional rack mountable DVD player with CD+G support, USB Player, and 2 microphone inputs. The perfect karaoke player for around the home or in a professional environment.
• Power Dynamics PDC-75 Media Player and Recorder - SKU PDC-75 - $199.00
  The Power Dynamics PDC-75 is an all-in-one media player with an integrated recorder and Bluetooth receiver. Perfect for playing / streaming your favorite songs or backing tracks for your band, cafe, or restaurant. The player supports a wide range of inputs and media formats, with both USB and SD card slots. Also featured on the PDC-75 is 3 additional AUX inputs, microphone input, and FM radio for maximum flexibility.
• Power Dynamics PDC40 DAB+ Tuner FM/USB/BT - SKU PDC-40 - $249.00
  The PDC40 is a compact DAB+ FM Tuner, with Bluetooth and has a built-in USB MP3 player. Because of its slim form factor and serving many functions, it is perfect for bars, restaurants, discos, drive-in shows and even home use.
• Power Dynamics PDX010 Phono Turntable Pre-Amplifier - SKU PDX010 - $50.00
  Power Dynamics PDX010 The Power Dynamics PDX010 is an ultra compact, high-quality Phono pre-amplifier. This device allows you to connect your turntable and convert the Phono output signal into a line level. A must have for modern HiFi systems, mixers, and even devices with an AUX input. Designed with RIAA correction for amplifying the weaker signal from your turntable / tape player to a normal line-signal without any loss of sound quality. A must have for vinyl enthusiast wanting to connect and play their vinyl turntable with modern Hi-Fi and speaker systems. Easy to use with a stereo RCA phono input with ground connector, and stereo RCA line-level output.
• Power Dynamics PDX30 DI Box Stereo - SKU PDX30 - $59.00
  Power Dynamics PDX30 The Power Dynamics PDX30 Stereo Direct Injection Box is a portable dual-channel stereo DI box that delivers superior connectivity and audio performance. Housed in a robust alloy case the PDX30 features XLR balanced outputs and 6.3mm linked inputs/outputs. A built-in ground-lift switch can help avoid noise from ground loops. The PDX30 supports 9V battery or 48V phantom-power operation and is suitable for active acoustic guitars, bass guitars, electric pianos, synthesizers, drum machines, samplers, DJ mixers, CD, DVD and Mp3 players.
• VOSCOM 1-Channel Duplex Analog Audio to Fibre Converter - SKU VOS-0100DT-R - $938.82
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• VOSCOM 1-Channel Simplex Fibre Optic Audio Transmission - SKU VOS-0100FT-R - $610.24
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• VOSCOM 2-Channel Duplex Audio Converter to Fibre - SKU VOS-0200DT-R - $1502.09
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• VOSCOM 2-Channel Simplex Fibre Optic Audio Transmitter - SKU VOS-0200FT-R - $938.82
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• VOSCOM 4-Channel Duplex Audio over Fibre Transmission - SKU VOS-0400DT-R - $2112.33
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• VOSCOM 4-Channel Simplex Audio Transmitter over Fibre - SKU VOS-0400FT-R - $1502.09
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• VOSCOM 8-Channel Duplex Fibre Optic Audio Links - SKU VOS-0800DT-R - $3332.78
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• VOSCOM 8-Channel Simplex Fibre Optic Audio Converter - SKU VOS-0800FT-R - $2112.33
  Key Features • 24-Bit Digitally Encoded Analog Audio • Support Multi-mode Fibre up to 2km • Support Single-mode Fibre up to 100km • Single-Fibre Digital Transmission • Stand-alone or Rack-mount
• Whirlwind WH MLTSEL4X Instrument 4-CH Rack Mount 4 To 1 or 1 To 4 Silent instrument Switch - SKU WH MLTSEL4X - $1564.02
  Key Features MULTISELECTOR 4X
• Whirlwind WH MLTSELAMP Instrument 4-CH Rack Mount 1 in to 4 Out Buffered Isolated Outputs Ground Lifts Phase Switches - SKU WH MLTSELAMP - $2226.32
  Key Features MULTISELECTOR AMP
• Whirlwind WH MLTSELAMPR Remote Contral Foot Switch for MLTSELAMP Requires 3-Pin XLR Cable - Not Included - SKU WH MLTSELAMPR - $786.83
  Key Features MULTISELECTOR REMOTES
• Whirlwind WH MLTSELPRO Instrument 4-CH Rack Mount 4 in to 1 Out Buffered W/ Tuner Output - SKU WH MLTSELPRO - $1821.71
  Key Features MULTISELECTOR PRO
• Whirlwind WH MLTSELPRO4XR Remote Control Foot Switch for MLTSEL4X and MLTSELPRO Requires 3-Pin XLR Cable - Not Included - SKU WH MLTSELPRO4XR - $799.96
  Key Features MULTISELECTOR REMOTES

Back to the start | Equipment list, every item