We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Axiom SW215FA Dual 15" Powered Flyable Subwoofer
SKU
SW215FA
The Axiom SW215FA is a compact high-output dual 15 inch powered flyable subwoofer featuring a manifolded band pass configuration for high output in a compact size. Flexible setup options suit touring, fixed installations and dance clubs. The flyable version includes suspension hardware matched for AX2065 line array elements with high-strength water repellent cones, advanced CORE Sharc DSP processing and PRONET management plus a Class D amplifier module with SMPS. Designed and made in Italy.
The Axiom SW215FA delivers serious low-end impact from a surprisingly compact dual 15-inch enclosure. Its manifolded band-pass layout maximises driver coupling without bulky resonant chambers, giving tight, punchy bass that stays defined right up to the crossover point.
Event crews and installers choose this sub when space and weight matter yet output cannot be compromised. It integrates cleanly with AX2065 line arrays for flown systems or sits on the floor for dance-floor reinforcement and permanent installs where fast transient response is essential.
Inside, two long-excursion 15-inch drivers with 75 mm voice coils and water-repellent cones are driven by a 2000 W Class D module. The advanced CORE DSP platform provides 96 kHz / 40-bit processing, four quick-access presets and full remote networking via PRONET software over CANBUS.
At just 68.5 kg the cabinet remains manageable for two technicians, while the built-in flying hardware lets users suspend multiple units beneath AX2065 arrays in minutes. Whether on tour, in a club or fixed in a venue, the SW215FA supplies solid low-frequency foundation without excess bulk.
- Compact high-output dual 15" subwoofer
- Manifolded Band Pass configuration for high output in a compact size
- Flexible setup options to suit almost any application
- Flyable with optional fly bar
- Perfectly matched for the AX2065 line array elements
- High-strength, water repellent cones
- Advanced CORE processing with Sharc DSP and PRONET PA management
- Digitally controlled Class D amplifier module with SMPS
- Designed and made in Italy
| Additional Information | System’s Acoustic Principle: Manifolded Band Pass Frequency Response (±3dB): 39 Hz – 100 Hz (Processed) Maximum Peak SPL @ 1m: 139 dB Type: Two 15” (380mm) woofer, neodymium magnet, 3” (75 mm) VC Cone: High stiffness, water repellent Voicecoil Type: Flux Demodulating Ring, with Double centering spider suspension Input Impedance: 20 kΩ balanced, 10 kΩ unbalanced Input Sensitivity: +4dBu / 1.25 V Signal Processing: CORE processing, 96kHz / 40bit floating point SHARC DSP, 24 bit AD/DA converters Direct access Controls: 4 Presets (2 x AX16CL / 4 x AX16Cl / 1 x AX16CL), Network Termination, GND Link Remote Controls: PRONET control software Network protocol: CANBUS Amplifier Type: Class D with SMPS, Variable Switching Frequency Output Power: 1000W + 1000W Mains Voltage Range: 230V ±15% - 115 ±15% 50/60Hz (internally selectable) IN / OUT Connectors: Neutrik XLR-M / XLR-F IN / OUT Network Connectors: ETHERCON®(NE8FAV) Mains Connectors: PowerCon® TRUE 1 (NAC3PXTOP) Cooling: Variable speed DC fan Dimensions (W x H x D): 571 mm x 800 mm x 582 mm (710 mm including wheels) Enclosure Material: 15 mm, reinforced phenolic birch Paint: High resistance, water based paint Suspension System: Side: High Strength Steel with ¼ Fast Pin Rear: High Strength Steel with ¼ Fast Pin Transport: 4 heavy duty 100 mm (4") castors, 4 handles Net Weight: 68.5 Kg |
|---|---|
| Main Sub Category | Audio |
Sales FAQ - Frequently Asked Questions
Here you'll find answers to our most asked questions about our sales products. Still can't find quite what you're looking for, or have something we should know? Send us an email, we're happy to help!
-
Q1: Do you ship to my country?
A1: Most likely, you can see what countries we ship to in the drop-down at the checkout.
-
Q2: Can i get a demo of the equipment?
A2: While we do do sales, we are predominantly a hire company so we do have some stock on hand but we dont have a storefront. If you'd like to get a demo on some equipment please call and we'll arrange an appointment to see the equipment if we have it available.
-
Q3: What are the accepted payment methods?
A3: We accept online card payment with MasterCard, VISA or direct deposit.
-
Q4: Does the price include GST?
A4: Our online prices displayed all include GST and are shown in AUD currency.
-
Q5: When do I receive my order?
A5: Most orders are dispatched from Melbourne but some orders are dispatched from warehouses located in different states of Australia, sometimes items are sourced directly from suppliers. Delivery time will depend on the shipping country and address.
-
Q6: Do I have to pay international taxes and duties?
A6: Your order may be subject to import duties and taxes, which are levied once a shipment reaches your country. We cannot control and is not responsible for any duties/taxes applied to your package upon delivery. You will be responsible for paying additional charges for customs clearance. Customs policies vary widely from country to country; please contact your local customs office for further information.
