Call +61 03 9372 5244

ARX Active DI Hire

DI Plus 2 RC is powered with an internal long life NiMH rechargeable battery that can be charged off either phantom power applied to either of the output XLR sockets or via the 12V DC input, removing battery throw away" as an environmental issue.""The new DI Plus2 RC features low noise high impedance input buffers with switchable 20db Pad, and low distortion high current output stages able to drive long cable runs." "

Need a quote! CLICK ENQUIRE button we will send it to you.

Need it right Now! CLICK CHAT or call one of our friendly staff on +61 03 9372 5244

.

Product Description

Details

Features a low noise high impedance input buffer with switchable 20dB Pad, and a low distortion high current output stage able to drive the longest cable runs. Packaged in a single channel stand-alone format. The DI Plus 2 represents another major step forward in active direct boxes.

Additional Information

Additional Information

Product Category Hire
Additional Information

Max Input Level
+12 dB Phantom powered
+6 dB Battery powered

Input Impedance 1 Meg Ohm

Max Output Level
+17 dB 10K Ohm load Phantom powered
+12 dB 10K Ohm load Battery powered
+11 dB 600 Ohm load Phantom powered
+12 dB 600 Ohm load Battery powered

Output Impedance 680 Ohms Balanced

Output Signal to Noise
-100 dB unweighted
-104 dB A weighted

Dynamic Range
117 dB 10K Ohm load Phantom powered
112 dB 10K Ohm load Battery powered
111 dB 600 Ohm load Phantom powered
107.5 dB 600 Ohm load Battery powered

Distortion 100 Hz .0018%, 1KHz .0028%, 10KHz .0056%

Frequency Response 20Hz to 20KHz, ± 0.2 dB

Gain through Unit: 6dB (Pad switch out)

Pad Switch: Global -20 dB attenuation

Input and Loop Out Connectors
Insulated jacks 
(!!!Note that Channel A Input connector switches the unit on when a plug is inserted. Remove plug when storing to avoid battery drain!!!)

Output Connectors
3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold.
Global Audio Ground (Pin 1) lift switch

Construction
All-steel chassis, fibreglass PCB, NiMH battery

Delivery/Pick Up

We do delivery/install for an affordable rate, it's up to you.

Based in Kensington we are on the edge of North Melbourne near the CBD. Central Melbourne audio visual business customer pick ups and deliveries are available, we deliver to the inner city but also well out of town.

Our fees on simple delivery is all dependant on the time our staff will be prepping, packing in the vehicle, transporting and unloading the equipment and vise versa for pickups. We'll do our best to accomodate you into our schedule so that you spend less on delivery.

Our friendly and knowledgable techs can be there to install, operate and remove the audio visual equipment if need be at fair cost to you.

To top