We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Laserworld PL-10000RGB PureLight Laser System with FB4
SKU
PL-10000RGB-FB4
Laserworld PL-10000RGB
The Laserworld PL-10000RGB Purelight show laser light is completely equipped with diodes and has a good white balance, with linear colour fading behaviour and high visibility. Fitted with an integrated FB4 network interface and supplied with Quickshow software for use straight out of the box. The Purelight series lasers use high-quality diodes to ensure the beam quality and colour is always up to show standard. The PL-10000RGB has a beam diameter of about 5.5 mm and divergence of only 1.3mrad. And is guaranteed to produce 10,000mW output power at the aperture – 3,000 mW / 638 nm (red), 3,000 mW / 520 nm (green), 4,500 mW / 450 nm (blue).
Ultrafast scanners trace the beam creating stunning visual and aerial effects. Scanning up to 35kpps at 8°ILDA, with a maximum scan angle of 50°.
The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
The show laser has an internal PSU for easy handling. At the back of the unit, there are trim pots for colour settings so the colour balance can be quickly adjusted. The X- / Y-axis offset can also be set by trim pots. Additionally, Scan Safety can be set at the back side of the laser system.
Important Safety Notice:
The Laserworld PL-10000RGB is an extremely high powered, Class 4A, laser display system, DJ City recommends avoiding scanning this laser into any crowd or area where the laser could be harmful (including reflective surfaces). Purposely aiming or reflecting any of the beams into a crow with the correct settings and safety measures may result in injury and permanent damage.
Please read the product manual before operating this laser system
Laserworld PL-10000RGB
The Laserworld PL-10000RGB Purelight show laser light is completely equipped with diodes and has a good white balance, with linear colour fading behaviour and high visibility. Fitted with an integrated FB4 network interface and supplied with Quickshow software for use straight out of the box. The Purelight series lasers use high-quality diodes to ensure the beam quality and colour is always up to show standard. The PL-10000RGB has a beam diameter of about 5.5 mm and divergence of only 1.3mrad. And is guaranteed to produce 10,000mW output power at the aperture – 3,000 mW / 638 nm (red), 3,000 mW / 520 nm (green), 4,500 mW / 450 nm (blue).
Ultrafast scanners trace the beam creating stunning visual and aerial effects. Scanning up to 35kpps at 8°ILDA, with a maximum scan angle of 50°.
The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
The show laser has an internal PSU for easy handling. At the back of the unit, there are trim pots for colour settings so the colour balance can be quickly adjusted. The X- / Y-axis offset can also be set by trim pots. Additionally, Scan Safety can be set at the back side of the laser system.
Important Safety Notice:
The Laserworld PL-10000RGB is an extremely high powered, Class 4A, laser display system, Wwave recommends avoiding scanning this laser into any crowd or area where the laser could be harmful (including reflective surfaces). Purposely aiming or reflecting any of the beams into a crow with the correct settings and safety measures may result in injury and permanent damage.
Please read the product manual before operating this laser system
- Premium laser projection system capable of ‘Pure’ white colour
- Powerful 10,000mW output with analogue colour modulation
- Ultrafast scanner speeds of 35 kpps @ 8°, with a max scan angle of 50°
- Ideal for larger events and aerial display
- Integrated ShowNET interface with laser software for use of out the box
- Control with DMX / ILDA / Stand Alone (auto/sound/master-slave)
- Integrated scan fail safety (SFS), safety key, and projector shield
| Additional Information | Guaranteed power at aperture: 10,000 mW Power Red: 3,000 mW / 638 nm Power Green: 3,000 mW / 520 nm Power Blue: 4,500 mW / 450 nm Beam Specifications: ca. 5.5 mm / 1.3 mrad Laser Sources: Diode Laser Class: 4 Operation Modes: ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, sound-to-light Scanner: 35 °ILDA Scan Angle max.: 50° max. Accessories: key, power cable, manual Power Supply: internal PSU Power Consumption: 350 W Dimensions: 335 x 265 x 180 mm (L x W x H) Weight: 14,6 kg |
|---|---|
| Audio Options | Wireless |
| Event Size | Up to 20 |
Sales FAQ - Frequently Asked Questions
Here you'll find answers to our most asked questions about our sales products. Still can't find quite what you're looking for, or have something we should know? Send us an email, we're happy to help!
-
Q1: Do you ship to my country?
A1: Most likely, you can see what countries we ship to in the drop-down at the checkout.
-
Q2: Can i get a demo of the equipment?
A2: While we do do sales, we are predominantly a hire company so we do have some stock on hand but we dont have a storefront. If you'd like to get a demo on some equipment please call and we'll arrange an appointment to see the equipment if we have it available.
-
Q3: What are the accepted payment methods?
A3: We accept online card payment with MasterCard, VISA or direct deposit.
-
Q4: Does the price include GST?
A4: Our online prices displayed all include GST and are shown in AUD currency.
-
Q5: When do I receive my order?
A5: Most orders are dispatched from Melbourne but some orders are dispatched from warehouses located in different states of Australia, sometimes items are sourced directly from suppliers. Delivery time will depend on the shipping country and address.
-
Q6: Do I have to pay international taxes and duties?
A6: Your order may be subject to import duties and taxes, which are levied once a shipment reaches your country. We cannot control and is not responsible for any duties/taxes applied to your package upon delivery. You will be responsible for paying additional charges for customs clearance. Customs policies vary widely from country to country; please contact your local customs office for further information.
