Laserworld Tarm 3 Outdoor 3W IP65 Analog RGB Laser System

The Laserworld Tarm 3 Outdoor is a professional 3W IP65 waterproof RGB laser system for outdoor installations. Its housing protects against water and solar heat with a rain-deflecting roof, while active watercooling and heating enable operation from -10°C to +45°C. It delivers 3000 mW guaranteed power with analog colour modulation, 45kpps ILDA scanners, low divergence beams and supports stand-alone, ArtNET, LAN and ILDA control with Showeditor software.

$10,999.00

The Laserworld Tarm 3 Outdoor is a professional 3W IP65 waterproof RGB laser system for outdoor installations. Its housing protects against water and solar heat with a rain-deflecting roof, while active watercooling and heating enable operation from -10°C to +45°C. It delivers 3000 mW guaranteed power with analog colour modulation, 45kpps ILDA scanners, low divergence beams and supports stand-alone, ArtNET, LAN and ILDA control with Showeditor software.

Chat Tech — Wwave Audio Visual
 

Built specifically for permanent outdoor laser displays, the Laserworld Tarm 3 Outdoor delivers reliable full-colour performance in exposed locations where standard projectors would fail.

The IP65-rated enclosure incorporates a protective roof over the output window, active water cooling and an integrated heating system, allowing the unit to run continuously across temperatures from -10 °C to +45 °C without external climate control.

Inside sits the same high-spec diode engine found in the indoor Tarm 3, producing 3000 mW of guaranteed white-light output with full analogue colour modulation and beams that remain tight at <0.6 mrad divergence.

Graphics work is handled by 45 kpps ILDA scanners, with an optional CT-6210 Turboscan upgrade available when higher scanning speeds are required for complex animations.

Control is flexible: the built-in ShowNET interface supports LAN, Art-Net and ILDA streaming, while an internal SD card allows stand-alone or automatic playback of over 120 preset patterns triggered via Art-Net.

Showeditor software is included, and the system remains fully compatible with external ILDA controllers such as Pangolin FB3, QuickShow or Beyond when more advanced programming is needed.

  • Professional 3W laser system in IP65 waterproof housing
  • 3,000 mW guaranteed power
  • Graphics capable - 45kpps @ 8° ILDA Scanners
  • High-quality diodes with full analog colour mixing
  • Extremely sharp intense beams - low divergence of <0.6 mrad
  • Control screen (internal) for convenient mode selection
  • Integrated powerful mainboard with advanced configuration, and DAC features
  • Free computer control software - Showeditor - upgradable to Showcontroller
  • Multiple control modes - stand-alone, ArtNET, LAN and ILDA streaming

More Information
Additional Information

Guaranteed Power at aperture: 3,000 mW

Power Red: 1000 mW / 637 nm

Power Green: 900 mW / 520 nm

Power Blue: 1,700 mW / 450 nm

Beam Specifications*: ca. 4.5 mm / <0.6 mrad

Scanner: 45kpps @ 8° ILDA; optional: CT-6210 with LAS Turboscan: 60kpps @ 8° ILDA, max. 60°

Max. Scan Angle: 50°

Laser Source: Diode

Laser Class: 4

Operation Modes: LAN, ArtNet, ILDA Streaming, integrated SD card, stand-alone

Basic Patterns: over 120 (layers, tunnels, fences, waves, etc.)

Accessories: Incl. power cable, manual, E-Stop, interlock connector, full version Showeditor software license included

IP rating: IP65

Power Supply: 85 V - 250 V / AC, 50/60 Hz

Power Consumption: 300 W

Dimensions: 800 x 370 x 260 mm

Weight: 22 kg

Main Sub Category Lighting

Sales FAQ - Frequently Asked Questions

Here you'll find answers to our most asked questions about our sales products. Still can't find quite what you're looking for, or have something we should know? Send us an email, we're happy to help!

  • Q1: Do you ship to my country?

    A1: Most likely, you can see what countries we ship to in the drop-down at the checkout.

  • Q2: Can i get a demo of the equipment?

    A2: While we do do sales, we are predominantly a hire company so we do have some stock on hand but we dont have a storefront. If you'd like to get a demo on some equipment please call and we'll arrange an appointment to see the equipment if we have it available.

  • Q3: What are the accepted payment methods?

    A3: We accept online card payment with MasterCard, VISA or direct deposit.

  • Q4: Does the price include GST?

    A4: Our online prices displayed all include GST and are shown in AUD currency.

  • Q5: When do I receive my order?

    A5: Most orders are dispatched from Melbourne but some orders are dispatched from warehouses located in different states of Australia, sometimes items are sourced directly from suppliers. Delivery time will depend on the shipping country and address.

  • Q6: Do I have to pay international taxes and duties?

    A6: Your order may be subject to import duties and taxes, which are levied once a shipment reaches your country. We cannot control and is not responsible for any duties/taxes applied to your package upon delivery. You will be responsible for paying additional charges for customs clearance. Customs policies vary widely from country to country; please contact your local customs office for further information.

Call