We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
LD Systems DQOR 3TW – 3″ Inch Two-way Passive Indoor/Outdoor IP65 Loudspeaker 70/100V – Pair White
SKU
LDDQOR3TW
The LD Systems DQOR 3TW is a two-way Passive Indoor/Outdoor Loudspeaker pair in White with a 16 Ohm, 70/100 V. The pair will create a pleasing environment for all your guests, family members, or customers.
LD Systems DQOR 3TW – 3″ Inch Two-way Passive Indoor/Outdoor IP65 Loudspeaker
The LD Systems DQOR 3TW is a two-way Passive Indoor/Outdoor Loudspeaker pair in White with a 16 Ohm, 70/100 V. The pair will create a pleasing environment for all your guests, family members, or customers. Whether for your home, backyard, or even a beach bar you will appreciate the sleek design that blends seamlessly into any setting.
Considered for both indoor and IP65 outdoor use, the two-way speaker will fit harmoniously into your background with a concealed cable design. The corrosion-resistant aluminium front grill will give you peace of mind while you are hosting an outdoor gathering or get-together. The DQOR 3TW speakers have a tilt angle of up to 27° and a 45° horizontal swivel angle. Which offers you plenty of flexibility when positioning the speaker in your ideal location.
3-position switches
Equipped with low distortion transformers for 70v/100v systems, all LD Systems DQOR3T, DQOR5T, and DQOR8T models minimize power loss. You can also adjust the output power of each individual speaker with the power tap feature. 3-position switches are available to adjust the installation speaker for 70V or 100V installation amplifiers. Or amplifiers with a low-impedance output of 16 Ohm. Just move the switch to the corresponding position prior to connecting to the amplifier.
Discrete wall mounting plate
The DQOR 3TW features a 4-pole terminal block with spring clamping for connecting a speaker cable with an up to 2.5 mmÇ cross-section. Also used for sending the amplifier signal to another speaker connected in parallel. Markings directly over the contacts provide aid for the correct polarity. Once you open the terminal contacts of the terminal block, just slide a small screwdriver with a flat head into the small opening above the respective contact. Just insert the stripped speaker cable into the terminal contact and pull the screwdriver out of the opening once again to close the terminal contact.
The speaker has a wall bracket with a practical lock mechanism. This is thanks to the integrated connector panel. You can also use the DQOR 3TW in visually demanding environments without visible cables. The 27° tilt and 45° swivel mechanism enable exact positioning for precise sound coverage offering a frequency response between 85Hz to 20kHz with (-10dB).
Enjoy shaping the background environment for all your guests, clients, and family members with the DQOR 3TW.
Also available in Black.
- For indoor and outdoor installation, IP65 (DQOR 3) and IP55 (DQOR 5 & 8) certified
- Corrosion-resistant aluminum front grille
- A modern, dynamic design blends unobtrusively into the ambiance
- Available in black or white
- Slide-and-lock wall mount with invisibly integrated connections
- Pleasant, balanced sound thanks to a 2-way design
- Woofer with weather-resistant coated paper cone and FerroFluid™-cooled dome tweeter with titanium cone
- Wide dispersion angle (120° horizontal, 80° vertical)
- BEM-optimized waveguide for consistent sound
- Available in 3-inch, 5-inch, and 8-inch versions
- Available in two connection variants: low impedance (8 ohms) or as 70/100V version with transformer taps, can also be driven with low impedance (16 ohms)
| Additional Information | Type: Passive Weight: 2.1kg Width: 114.6 mm Height: 180 mm Depth: 180.8 mm Accessories included: Allen Key for the safety screw, Bracket for surface mount
Size woofer: 3 ” Size woofer: 76,2 mm Magnet woofer: Ferrite Woofer brand: Custom Made Voice coil woofer: 1 ” Voice coil woofer: 25.4 mm Horn: BEM optimized CD waveguide HF driver size: 1 ” HF driver size: 25.4 mm Magnet HF driver: Neodymium Brand HF driver: Custom Made Voice coil HF driver: 1 ” Voice coil HF driver: 25.4 mm Dispersion angle (H x V): 120° x 80° (-6 dB) Power handling (RMS): 30 W Power handling (peak): 60 W (>200Hz) Frequency response: 85 – 20000 Hz (-10dB) Crossover frequency: 2200 Hz SPL (1 W/1 m): 80 dB Max. SPL: 98 dB Impedance: 16 Ohm Input selector switch: 70 V – 100 V – 16 Ohm 100V transformer taps: 30 – 6 – 3 – 1.5W 70V transformer taps: 30 – 6 – 3 – 1.5W Speaker input terminals: 4-pole terminal block. Pitch 5.08mm Housing material: ABS plastic IP protection class: 65 Housing color: White (RAL 9010) Dimensions (WxDxH): 114x180x180mm |
|---|---|
| Audio Options | Wireless |
| Event Size | Up to 20 |
Sales FAQ - Frequently Asked Questions
Here you'll find answers to our most asked questions about our sales products. Still can't find quite what you're looking for, or have something we should know? Send us an email, we're happy to help!
-
Q1: Do you ship to my country?
A1: Most likely, you can see what countries we ship to in the drop-down at the checkout.
-
Q2: Can i get a demo of the equipment?
A2: While we do do sales, we are predominantly a hire company so we do have some stock on hand but we dont have a storefront. If you'd like to get a demo on some equipment please call and we'll arrange an appointment to see the equipment if we have it available.
-
Q3: What are the accepted payment methods?
A3: We accept online card payment with MasterCard, VISA or direct deposit.
-
Q4: Does the price include GST?
A4: Our online prices displayed all include GST and are shown in AUD currency.
-
Q5: When do I receive my order?
A5: Most orders are dispatched from Melbourne but some orders are dispatched from warehouses located in different states of Australia, sometimes items are sourced directly from suppliers. Delivery time will depend on the shipping country and address.
-
Q6: Do I have to pay international taxes and duties?
A6: Your order may be subject to import duties and taxes, which are levied once a shipment reaches your country. We cannot control and is not responsible for any duties/taxes applied to your package upon delivery. You will be responsible for paying additional charges for customs clearance. Customs policies vary widely from country to country; please contact your local customs office for further information.
