LD Systems RoadBuddy 10 Portable PA with Wireless Mic

LD Systems RoadBuddy 10

The LD Systems RoadBuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates with 655 – 679 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B6) or as an alternative a headset microphone with belt pack (LDRBUD10HSB6) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy10 has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy 10 is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

 

$1,269.00

LD Systems RoadBuddy 10

The LD Systems RoadBuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates with 655 – 679 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B6) or as an alternative a headset microphone with belt pack (LDRBUD10HSB6) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy10 has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy 10 is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

 

LD Systems RoadBuddy 10

The LD Systems RoadBuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates with 655 – 679 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B6) or as an alternative a headset microphone with belt pack (LDRBUD10HSB6) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy10 has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy 10 is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

 

  • Battery-powered speaker solution
  • Integrated radio receiver 655 – 679 MHz
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • Wireless microphone and IR-remote control included

More Information
Additional Information

Product Model: LDRBUD10B6

Product type: Battery-powered PA speaker

Low/mid driver: 10 ” (254mm)

HF driver: 1 ” (25.4mm)

Amplifier: Class D

RMS: 120 W

Peak power: 480 W

Frequency response: 55 – 18kHz

SPL (1W/1m): 96 dB

Max. SPL: 115 dB

Protection circuits: over-current , overload protection , short circuit

Controls: AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume

Indicators: Charge/battery status , Power

Supported media: Bluetooth , SD Card , USB stick

Inputs: 2 x RCA (line), 2 x Combo Jack/XLR (mic/line), 3.5 mm jack (aux)

Outputs: 1x 6.3mm Jack (line)

Transmission frequency range: 655 – 679 MHz

RF Power Output: 10 mW

Operating voltage: 100 V – 120 V / 60 Hz , 220 V – 240 V AC / 50 Hz

Rechargeable batteries: 12 V / 5 Ah

Dimensions: 415 x 525 x 328 mm

Weight: 16.5 kg

Audio Options Wireless
Event Size Up to 20

Sales FAQ - Frequently Asked Questions

Here you'll find answers to our most asked questions about our sales products. Still can't find quite what you're looking for, or have something we should know? Send us an email, we're happy to help!

  • Q1: Do you ship to my country?

    A1: Most likely, you can see what countries we ship to in the drop-down at the checkout.

  • Q2: Can i get a demo of the equipment?

    A2: While we do do sales, we are predominantly a hire company so we do have some stock on hand but we dont have a storefront. If you'd like to get a demo on some equipment please call and we'll arrange an appointment to see the equipment if we have it available.

  • Q3: What are the accepted payment methods?

    A3: We accept online card payment with MasterCard, VISA or direct deposit.

  • Q4: Does the price include GST?

    A4: Our online prices displayed all include GST and are shown in AUD currency.

  • Q5: When do I receive my order?

    A5: Most orders are dispatched from Melbourne but some orders are dispatched from warehouses located in different states of Australia, sometimes items are sourced directly from suppliers. Delivery time will depend on the shipping country and address.

  • Q6: Do I have to pay international taxes and duties?

    A6: Your order may be subject to import duties and taxes, which are levied once a shipment reaches your country. We cannot control and is not responsible for any duties/taxes applied to your package upon delivery. You will be responsible for paying additional charges for customs clearance. Customs policies vary widely from country to country; please contact your local customs office for further information.

Call