We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
LD Systems ZONE X 1208 D Hybrid Architecture DSP Matrix 12 IN / 8 OUT + DANTE
Today’s installations have become increasingly complex. The ZONE X 1208 makes flexible routing options using presets and automated processes a reality. Because of the DSP hybrid architecture, the Zone X 1208 can adapt your sound system for a variety of circumstances and possible uses.
LD Systems ZONE X 1208
Introducing the LD Systems ZONE X 1208 D Hybrid Architecture DSP Matrix 12 IN / 8 OUT + DANTE.
Today’s installations have become increasingly complex. The ZONE X 1208 makes flexible routing options using presets and automated processes a reality. Thanks to the DSP hybrid architecture, the Zone X 1208 can adapt your sound system for a variety of circumstances and possible uses.
Featuring 12x balanced mic/line inputs with low-noise mic preamps. As well as separate switchable 48V phantom power and 8x balanced line outputs are ready at your disposal. Also included are 8x GI and GPO logic ports with integrate automated processes and even integrate third-party devices.
Setting up your ZONE X 1208 D is convenient to set up and manage. This is done through the Ethernet port which supports the universal Xilica Designer, providing you with an overview of all your connections. The Xilica Designer is also compatible with macOS and Windows.
The Dante standard opens up a whole world of compatible devices from different manufacturers for all conceivable applications. In addition, thanks to the additional REMOTE bus connection, the ZONE X 1208 D is already equipped for future remote panels and paging microphones from LD Systems. Dante 64 x 64 channels are available for audio over IP applications.
Whether routing and processing different microphones and/or speaker groups to complex multi-room installations. The ZONE X 1208 D makes everything possible.
- DSP processor with hybrid architecture that allows users to adapt to different installation requirements via templates
- 40-bit floating-point DSP engine with Analog Devices dual-core SHARC+ and ARM Cortex A5 processor
- New generation Linux operating system
- Premium microphone preamplifiers and high resolution 32 bit-AD/DA converters
- 12 balanced audio mic/line inputs with 48V phantom power selection per channel
- 8 balanced line outputs
- 8 GPI and 8 GPO logic ports
- REMOTE bus for integration of future remote panels and paging microphones from LD Systems
- Ethernet + Dante interface for remote control via the universal control software Xilica Designer and integration of Dante-compatible devices
- Integrated event scheduler
| Additional Information | Width: 19“-Rack (483 mm) Height: 1 RU (44.5 mm) Depth: 315 mm (incl. terminal block connectors) Weight: 4 kg
Audio inputs: 1 Remote Bus Audio input, 12 balanced Mic/line inputs Audio output: 8 balanced line outputs Logic inputs: 8 GPI – short to ground to activate Logic outputs: Modes selectable per output Remote-Bus: Yes Connectors: 3-pin Terminal Block Pitch 3.81mm, Ethernet RJ45, I/O Connectors, Remote IN RJ45, Service connection Micro USB type B Indicators: Inputs 1 – 12 and outputs 1 – 8: signal indication white, Network, Power, Remote Controls Front panel: no Controls Element Back Panel: IP Reset, Power On/Off Expansion Slot: Ethernet + Dante- (ZONEX1208D), For Ethernet- (ZONEX1208) Cooling: Convection, passive Operating voltage: Wide Range SMPS Mains connector: 3-pole IEC mains connection (mains socket)
Performance specifications Nominal input sensitivity: -22 dBu (Sine 1 kHz, Gain max) Nominal input clipping: +20 dBu (Sine 1kHz) Distortion factor (THD+N): +13 dBu Signal, <0,003% (Line IN – OUT), 20 Hz – 20 kHz, Gain 0 dB) Intermodulation Distortion (SMPTE): < 0.01% (-10dB below clip) Analyzer BW 90kHz Frequency response: 15 Hz – 22 kHz (+/-0.15 dB) Input Impedance: Line 4k Ohms (balanced) Signal-to-noise ratio: >117 dB @ +20 dBu, Gain 0 dB, 20 kHz BW, A-weighted Dynamic range (DR AES17): 112 dB dB Crosstalk: 105 dB @ 10 kHz, 120 dB @ 1 kHz, 120 dB @ 100 Hz CMRR IEC: > 60 dB (1 kHz) Max. Gain: 42 dB
Digital Specifications DSP: 40-bit floating point Analog Devices Dual-core SHARC+ processor System Latency: 4.3 ms AD/DA converter resolution: 32 bit AD/DA converter sampling rate: 48 kHz |
|---|---|
| Audio Options | Wireless |
| Event Size | Large events |
| Event Size | Up to 20 |